Left Continue shopping
Your Order

You have no items in your cart

Free shipping when you spend € 29.99
QDM59Y8

Polish semi-permanent LCI - CAT 02 - 5D

€13,00

  • Olografico, si esalta con il nero
  • Senza sostanze nocive

Description

Polish semi-permanent
For. 10 ml
LED/UV technology


TECHNOLOGY - 5D

In the image, an application with the first layer (after BASE COAT) of Nero S40518. This technique is recommended if you want to highlight the effect of Cat Eye enamels.
You can change the effect using a nail magnet, you can find it among our accessories.

We have included in the images only some of the many effects that can be realized.

IMPORTANT: The effect with the magnet must be done before catalyzing the polish and then, applying the TOP COAT product.
If you want to apply 2 layers of Cat Eye color, this should be done on both layers, before catalyzing in the lamp, below you can consult the WAY OF USE.

I recommend, do not touch the polish with the magnet, just touch it.

We recommend applying 1 layer of color if you use a black bottom as the first layer of semi-permanent.

_

Always remember to apply base, polish and top even on the tip of the nail (on thickness), this technique will guarantee you impeccable hold.
Remove in just five minutes without EVER smoothing the nail.
The semi-permanent LCI does not damage natural nails.

1. lasts 3 weeks
2. polish training
3. Brilliant effect
4. Catalyze in just 60 sec. with lamp.led
5. DOES NOT contain harmful substances:Formaldehyde, Toluene and DBP

Use

Nail preparation Accessories: Gloves - Lima - Tronchesina - Finishing block - Cuticle pushes - Pressed cotton pad - Disinfectant - fluidpro® - Magnet

Let's put on the gloves and get started.
1 We vaporize the customer's tools and hands with the disinfectant. We dry our hands well with a towel.
2 With tronchesine, we cut the excess cuticles
3 We push the small cuticles along the perimeter of the nail, using the cuticle push or orange stick
4 We use the file (side 180) to give the preferred shape to the nails
5* We take the finishing block and evenly mattify the nail
6* Now with a cotton pad moistened with fluidpro, we clean the surface of the nail from the dusty residues

Application of the semi-permanent LCI
Accessories: Color - BASE - TOP - Pressed cotton pad - Cleaner - fluidpro® - UV lamp or LED - Cuticole oil
7* We apply a THIN and HOMOGENEOUS layer of BASE, taking care not to touch the cuticles
8* We catalyze in UV lamp for 120 sec. (in LED lamp 60 sec.)
9 Now, with a DRY pad we eliminate the dispersion released by the BASE, passing it on the surface of the nail. Don't be afraid, let's do it decisively.

What is dispersion? Dispersion can be given by both the BASE, , and the TOP. It is a thin and sticky layer caused by the excessive amount of product applied.

10.1 (OPTIONAL) We apply a layer of Black or NUDE color depending on the final effect we want to desire and catalyze in lamp for 120 sec or 60 sec in LED lamp.
10.2* We apply the first layer of color. Here too, we try not to dirty the cuticles and apply it in a homogeneous and subtle way.
Now with the magnet, create the desired effect.
We catalyze in UV lamp for 120 sec. (in LED lamp 60 sec.)
11 Now we are ready to apply the TOP. We make a homogeneous, thin layer and catalyze in UV lamp for 240 sec., i.e. 2 timer cycles (in LED lamp 120 sec.).
12* We take a pressed cotton square, moisten with the Cleaner and clean the surface from the dispersion of the TOP.
13 At this point we can apply cuticles oil, distributing a small amount on the perimeter of each nail. We gently massage our fingers and compliments, we finished our manicure with semi-permanent!

USEFUL TIPS
5* Be careful not to leave any part of the shiny nail. We always check the backlight that the surface is all completely opaque.
6* Attention, after completing this process we never touch the nail again for any reason, we could fatten it again and this will create possible problems of future tightness.
7* We do not leave any part of the nail not covered by the base. Let's check, here too, looking at the backlight surface. I recommend that it be a thin layer, otherwise, a thick layer could give problems of color duration and excessive dispersion.
8* Be careful to place your hand well, so that all fingers are evenly facing under the range of the bulbs. We don't bend our thumbs much, but we try to lay it out as best we can.
10* We must not be in a hurry to see a completely covering effect right away, we last all the steps well. If we dirty the cuticles or skin, we clean with the orange stick moistened with fluidpro before catalyzing in the lamp.
12* To eliminate the dispersion of the TOP, we can also use the fluidpro instead of the Cleaner. But be careful, in this case the passage on the surface of the nail must be quick and light to avoid mattifying the result.

IMPORTANT: Apply the product (base, color, top) also on the tip of the nail before catalyzing in the lamp (TIP CLOSURE technique). This will guarantee a long duration of the polish.