For. 10 ml
We recommend applying 3 layers to ensure over 3 weeks of absolute perfection and perfect nail coverage.
Always remember to apply the base, polish and top even on the tip of the nail (on the thickness), this technique will guarantee you a flawless hold.
Removal in just five minutes without EVER filing the nail.
The semi-permanent LCI does not harm natural nails.
1. lasts 3 weeks
2. Professional polish
3. brilliant effect
4. catalyzes in just 60 sec. with led flash
5. Does NOT contain harmful substances:Formaldehyde, Toluene and DBP
Nail preparation Accessories: Gloves - Lima - Nipper - Finisher block - Cuticle pushers - Pressed cotton pad - Disinfectant - fluidpro®
Let's put on the gloves and get started.
1 We vaporize the customer's tools and hands with disinfectant. We dry our hands well with a towel.
2 With the nipper, we cut the cuticles in excess
3 We push the small cuticles along the perimeter of the nail, using the cuticle pusher or orange stick
4 We use the file (side 180) to give the preferred shape to the nails
5* We take the finishing block and evenly matte the nail
6* Now with a cotton pad moistened with fluidpro, we clean the surface of the nail from dusty residues
Application of the semi-permanent LCI
Accessories: Color - BASE - TOP - Pressed cotton pad - Cleaner - fluidpro® - UV or LED lamp - Cuticle Oil
7* We apply a THIN and HOMOGENEOUS layer of BASE, taking care not to touch the cuticles
8* Catalyze in UV lamp for 120 sec. (in Led lamp 60 sec.)
9 Now, with a DRY pad we eliminate the dispersion released by the BASE, passing it on the surface of the nail. Do not be afraid, let us do it decisively.
What is dispersion? The dispersion can be given both by the BASE, and by the TOP. It is a thin and sticky layer caused by the excessive amount of product applied.
10* We apply the first layer of color( we recommend 3 total layers). Here, too, we try not to dirty the cuticles and to apply it evenly and thinly. Catalyze in UV lamp for 120 sec. (in Led lamp 60 sec.) THIS POINT, LET'S REPEAT IT 3 TIMES (3 layers of color)
11 We are now ready to apply the TOP. We make a homogeneous, thin layer and catalyze in UV lamp for 240 sec., or 2 timer cycles (in Led lamp 120 sec.).
12* We take a square of pressed cotton, moisten with the Cleaner and clean the surface from the dispersion of the TOP.
13 At this point we can apply the cuticle oil, distributing a small amount on the perimeter of each nail. We gently massage our fingers and congratulations, we finished our manicure with semi-permanent!
5* We are careful not to leave any part of the nail shiny. We always check against the light that the surface is all completely opaque.
6* Attention, after completing this process we never touch the nail again for any reason, we may gain weight again and this will create possible problems of future tightness.
7* We do not leave any part of the nail not covered by the base. We check, even here, looking at the surface against the light. I recommend that it be a thin layer, otherwise, a thick layer could give problems of color durability and excessive dispersion.
8* We take care to position the hand well, so that all the fingers are evenly turned under the radius of the bulbs. We do not bend the thumb much but try to spread it as best we can.
10* We must not be in a hurry to see a completely covering effect right away, we finish all the steps well. If we dirty the cuticles or skin, we clean with the orange stick moistened with fluidpro before catalyzing in the lamp.
12* To eliminate the dispersion of the TOP, we can also use the fluidpro instead of the Cleaner. But be careful, in this case the passage on the surface of the nail must be quick and light to avoid matting the result.
IMPORTANT: Apply the product (base, color, top) also on the tip of the nail before catalyzing in the lamp (technique of CLOSURE AT THE TIP). This will ensure a long duration of the polish.